Used Equipment

Available Used Equipment


From time to time, Custom Rollform Products has used machines for sale. Here you will find our current list of available used equipment. If you are not seeing what you are looking for or just are wanting new equipment, please take a look at our Machinery or contact us by email or call us.

$20,000 or Best Offer

This 2005 HAAS TM2 Vertical Machining Center is a great choice for any shop looking for a toolroom CNC mill. It has a 40″ X-axis travel, 16″ Y-axis travel, and 16″ Z-axis travel, allowing for a wide range of machining operations. The rapid rate for each axis is 200 IPM, and the maximum table load is 1,000 lbs. The spindle motor is 7.5 HP and the spindle speed is 4,000 RPM, with a 40 CT spindle taper. The machine also has a 10 ATC tool changer. This machine is in good condition and is available immediately. Toolholders are not included, but the machine does have a HAAS CNC control. This is a great machine for any shop looking for a compact 3 axis CNC machine.

Brand: HAAS

Model: TM2

Year: 2005

Category: CNC Mill

 

Specs as follows:

X Axis Travel: 40″
Y Axis Travel: 16″
Z Axis Travel: 16″
Rapid Rate X Axis: 200 IPM
Rapid Rate Y Axis: 200 IPM
Rapid Rate Z Axis: 200 IPM
Max Table Load: 1,000 LBS
Spindle Motor: 7.5 HP
Spindle Speed: 4,000 RPM
Spindle Taper: 40 CT
Tool Changer: 10 ATC
Rigid Tap (Available through Haas)
3.5″ Floppy Drive
Coolant Pump Kit
Table Size: 57″ x 10″
Dimensions: 100″ x 64″ x 100″
Weight: 5,200 LBS

Run Time: 3620 Hours

Options: HAAS CNC Control, Extended Enclosure