3991 Green Park Road, St. Louis, MO 63125

Decoiler Coil Cars & Upenders

Coil / Sheet Handling Equipment
Home
Decoilers Pictures of Decoilers Decoiler Specifications Decoiler Diagrams Coil Cars

 DECOILER COIL CARS

The Coil Lift Cars design is to assist in loading the coil onto the Decoiler Mandrel. The Coil Car gets its power from the Decoiler Hydraulic Power Supply and operated from hand held Push Button Controls. All Units will have a 12” lift and a 2’ travel over the widest strip width.

2,500# to 10,000# capacity
15,000# to 20,000# capacity
25,000# to 30,000# capacity

∗∗ add $3,500 for Decoilers less hydraulics

Coil Car

COIL CAR / UPENDERS

90° positioning the coils inline with the Decoiler Mandrel. The skidded coil is loaded onto the horizontal platform which is then rotated vertically. The coil can then be raised and lowered and fed onto the Decoiler Mandrel like a standard Coil Car System. It is also powered from the Decoiler Hydraulic Power Supply with similar travel lift and controls as described under Coil Cars above.

2,500# to 10,000# capacity
15,000# to 20,000# capacity
25,000# to 30,000# capacity

COIL CAR WITH COIL
Stage 1 Loaded Coil
PICTURE22
Skidded Coil is loaded onto a Horizontal Platform
The combination Coil Car / Upender performs all your coil handling operations in one compact Unit. It safely rotates loading it onto a horizontal Vee Deck. Once upright, remove the skid and the System operates as a Standard Coil Car. The Coil then can raise or lower to center the coil core inline with the Decoiler Mandrel. The System will then laterally feed the coil onto the Decoiler Mandrel. Remove the coils from the Decoiler by reversing the operation and place back onto skids. Use the System independently as a Free Standing Coil Upender for other operations or lines.
Stage 2 Up End Coil and Platform is rotated 90 degrees onto Vee Deck
Stage 4 Coil is raised and lowered to align with Decoiler Mandrel (Skid is removed)
STAGE 6 Loaded Coil

Skidded Coil is loaded onto Horizontal Platform

TRAVEL BASE DECOILER




The Travel Base option is will position the Decoiler laterally inline with the Coil Strip Feed. Primarily designed for variable width application requiring a center line feed. This allows the operation to position the Coil Back Flange inline with the ever changing Infeed Guides. The Decoiler moves on Track and Rollers with hydraulic positioning.

2,500# to 10,000# capacity
15,000# to 20,000# capacity
25,000# to 30,000# capacity

Coil Cars

Leave a Reply