Utilizing the one piece full wrapper design concept increased the manufactures production capabilities and greatly reduced the welding and finish time. This system produced full wrapped four (4) sided housing ranging from 24” x 24” to 36” x 72” in three (3) depths (strip widths). The Coil Feed, Notched, Punched , Rollformed and Tangent Formed housings are complete and automatic. The front flange (4” with a 2” return) was Rollformed simultaneously with the 1-1/2” back flange. The Notched and Rollformed wrapper was fed directly into the programmed Tangent Former to produce the completed formed four (4) sided housing. Finished parts were ejected and conveyed to the customers robotic welding system.Safes are produced on a just-in-time basis with no set-up or scrap loss when changing part sizes within the coil width and gauge range. |
 |
 |