20 GA. STAINLESS STEEL FULL WRAPPER HOUSING
Complete Coil Fed Notch, Cutoff, and Rollform System with Programmable Tangent Wingformer. The System is designed to produce a wide variety of stainless Housings with no setup or scrap loss.
Daily production can be downloaded from an office computer based on height, width and quantities required.
On-time production to feed complete Housing directly into the Weld Seam System.
Using a common coil strip width the Stainless Steel Kennel System is designed to notch, punch and rollform, and tangent form the 1/2” radius corners. Unit can produce a 48” x 72” Housing then an 18” x 18” without any setup or changeover.
 |
 |
 |