| Coil / Sheet Handling Equipment Home |
Decoilers | Pictures of Decoilers | Decoiler Specifications | Decoiler Diagrams | Coil Cars |
DECOILER COIL CARSThe Coil Lift Cars design is to assist in loading the coil onto the Decoiler Mandrel. The Coil Car gets its power from the Decoiler Hydraulic Power Supply and operated from handheld Push Button Controls. All Units will have a 12” lift and a 2’ travel over the widest strip width. 2,500# to 10,000# capacity |
 |
|
COIL CAR / UPENDERS90° positioning the coils inline with the Decoiler Mandrel. The skidded coil is loaded onto the horizontal platform which is then rotated vertically. The coil can then be raised and lowered and fed onto the Decoiler Mandrel like a standard Coil Car System. It is also powered from the Decoiler Hydraulic Power Supply with similar travel lift and controls as described under Coil Cars above. 2,500# to 10,000# capacity |
 |
|
 |
Loaded Coil Skidded Coil is loaded onto a Horizontal Platform |
The combination Coil Car / Upender performs all your coil handling operations in one compact Unit. It safely rotates loading it onto a horizontal Vee Deck. Once upright, remove the skid and the System operates as a Standard Coil Car. The Coil then can raise or lower to center the coil core inline with the Decoiler Mandrel. The System will then laterally feed the coil onto the Decoiler Mandrel. Remove the coils from the Decoiler by reversing the operation and place back onto skids. Use the System independently as a Free-Standing Coil Upender for other operations or lines. |
 |
Up End Coil and Platform is rotated 90 degrees onto Vee Deck | |
 |
Coil is raised and lowered to align with Decoiler Mandrel (Skid is removed) | |
 |
Loaded Coil Skidded Coil is loaded onto Horizontal Platform |
|
TRAVEL BASE DECOILER
2,500# to 10,000# capacity |
 |
|