Tangent Forming Radius Corners on Stainless Steel Oven Cavities
Integrated Rollform, Tangent Form, and Welding Application |
 Forming Unit with Inline Welding |
| The Oven Cavities System will tangent form the two ends and form the 1-1/2” radius corners. The Unit is completely automatic and programmed to produce a variety of three sided “U” Shaped Housings and four sided Full Wrapper Housings. Pre-punched and notched blanks are fed onto an Entry Conveyor which senses the length, width, and punch pattern variables. This information sets the width of the Rollformer and programs the forming sequence of the Tangent Former. The System is designed to make a wide range of “U” Shaped and Full Wrapper Housings. Sensing and automatic programming ensures the System produces a good part even when the Operator loads the wrong blank.A Rollformer is used to form the front and back outer edge flanges and adjust automatically for the width variable required. Two Tangent Endformers form the 90° lead and trail ends of the Housings. Two Programmed Radius Tangent Forming Units form the 1-1/2” radius corners to produce the “U” Shape or four sided Full Wrapper Housings. Full Wrapper Housings are then held, and spot welded inline within the Tangent Forming Unit. |
18 Ga. (.042) Stainless Steel |
 |
 |