3991 Green Park Road, St. Louis, MO 63125

Gun Safes

(10, 11 & 12 Ga.) Steel
Coil Fed, Rollform Flanges
Programmed Full Wrapper Tangent Former
 SafeUtilizing the one piece full wrapper design concept increased the manufacturer’s production capabilities and greatly reduced the welding and finish time.

This system produced full wrapped four (4) sided housing ranging from 24” x 24” to 36” x 72” in three (3) depths (strip widths). The Coil Feed, Notched, Punched, Rollformed and Tangent Formed housings are complete and automatic. The front flange (4” with a 2” return) was Rollformed simultaneously with the 1-1/2” back flange.

The Notched and Rollformed wrapper was fed directly into the programmed Tangent Former to produce the completed formed four (4) sided housing. Finished parts were ejected and conveyed to the customer’s robotic welding system.

Safes are produced on a just-in-time basis with no setup or scrap loss when changing part sizes within the coil width and gauge range.

Variable Head RollformerTwenty (20) Station Variable Head Rollformer. Part Width Changeover In Less Than 1 Minute.

Tangent Form Program Sequence

Safe Part ProfileSafe HousingSteel ShopAutomated Coil Feed System to Notch, Punch,
Rollform & Tangent Form 10, 11 & 12 Ga.
Full Wrapper Gun Safe CabinetsProgrammable Tangent FormerProgrammable Tangent Former
Eliminates SetUp, Changeovers, & Downtime to Vary Height, Width & Depth of Full Wrapper Cabinet.

 

Leave a Reply